Combat SMG-PDW
This one is made from a BrickArms Combat SMG and a BrickArms Assault Carbine. ( Credit actually goes to BrickArms Forums member joeri83)
I cut off the handguard of a Combat SMG to start with. I then shortened the handguard itself by cutting off a small chunk and evening it out so it would glue on straight. I glued it back onto the body of the Combat SMG, and cut off the original stock.
Then an Assault Carbine was used by cutting off the stock of that and glueing it onto the Combat SMG,creating this.
Intervention
This is originally inspired by BrickArms Forums member ISwiperGoSnipin, and I made some changes.
It uses a BrickArms Precision Sniper Rifle basis. I cut off the original scope which was too long and unrealistic to the real Intervention.I cut the scope off of a BrickArms M21 (It was a scrap scope I've had for a long time) and glued it on to the PSR (Precision Sniper Rifle). I then took a regular Lego lever and cut the end off to use as a bolt, glueing it on next to the scope.
I then take an Assault Carbine, cut off the rail system, then cut off the end of it (Scope). After, I cut off a little piece, glued it in front of the magazine, and glued the rest in front of that,while the two pieces were touching.
The silencer is removable, made from a squishy Lego flex tube.
Camouflaged M21
This one was very fun. My own design, might I add. It's inspired by Call of Duty 4: Modern Warfare's mission "All Ghillied Up".
I took a regular black BrickArms M21, cut the magazine at an angle to represent a 10-round magazine, painted the magazine a steel color, and then painted a base of dark olive on everything but the rear iron sights, the main rifle grip, and the barrel. I painted woodland camouflage on everything with an olive base. Once that was done, I picked some grass from my yard, and started applying glue and placing the grass on, and in front of the magazine, I started applying glue on both sides of the gun and wrapping the grass around, until I felt it was completely ghillied just like the game.
After,I re-did some camouflagearound where the grass was glued because I used some olive paint as well along with glue. Then, I used tan/dark tan paint to paint all of the grass around the gun. After all of that, I painted patches of olive on the tan-painted grass.
What really came to me was the scope. In the game, your player's M21 in the mission "All Ghillied Up" has a reflective scope that looks like a cobalt blue. So what I did is paint the scope's lenses a shiny blue, which is visible in the picture above.
Woodland CamouflageI do my woodland by taking the desired BrickArms accessory/ies and painting the parts I want to be camouflaged dark olive, and then I paint a mixture of blobs and stripes that look remotely like camouflage of each of 3 different colors: Brown, tan, and black. I also leave plenty of patches of olive on the gun.
I've also got a camouflaged
U-Clip and
Monopod.
Tactical MP5-PDW
One of my favorites, and it's made using the same technique as the first, only with this is silver. Starting after getting the first part done (Explained in the first mod shown in this post), I took a silver BrickArms Stun Grenade, and cut the pin off of it. I then glued it on under the handguard as the forward grip. Then, I took a silver BrickArms MGL, cut off the scope, and glued it on here as the scope. I then took a gunmetal MGL, cut the scope off, then cut the back of the scope off and glued it on the right side as a flashlight. For the "wire", I used a small piece of black string glued on. On the left side (The first picture shown of this specific mod), I took the scope part of the rail system from the Intervention mod and glued it on the left side of the handguard as a laser.
MP5k
This is similar to the first. I took a black Combat SMG, cut off the handguard, and cut it down shorter. I then re-glued it onto the body, and then cut off the stock, but didn't replace the stock with anything else. I then cut off the magazine, and cut it down a little bit shorter so that it could get shorter when slicing bits off to make it so it would be straight and leveled when glued back on. Then I glued it back on (Obviously :P).
So that's how this blog will basically work, of course there's most likely going to be one modification per-post, as it takes some time to plan one out, get the materials, and do it.
I've got one mod in the works...the paint is drying at the moment.
~fk~
Well, you will be seeing it completed in July after a large order is recieved, along with loads of other new, cool mods. All are planned out in mock-ups in MS Paint. The handle for this was taken from a failed mod using a BrickArms Space Assault Rifle (Which is based off the HALO Assault Rifle). The stock begins with a rectangle cut out from a BrickArms Precision Sniper Rifle's stock. It ends with most of a BrickArms Combat LMG's stock. It's not really the same black and doesn't have the kind of lust as the handle does because the Combat LMG was green originally. I have 3 green Combat LMGs (Free weapons from orders) and don't use them, and I cut one's stock off, glued it on here, and painted it black. Then I took the magaine from a BrickArms Micro SMG (Those are based off of Uzi Pistols (I think Uzi Pistols) mod I did with an extended magazine. I cut it at an angle on the bottom and glued it one here. I cut a section out of the Combat LMG stock before glueing it and painting it.As you can see in the first picture, it's grip-able.
